Shantui SM100MT-3 road milling machine is one 1m-wide wheeled milling machine mainly applied for the  removal and stripping of pavement diseases on urban roads and asphalt roads in various grades as well as for the  small-scale operations of expressways, airport runways, and ports and harbors and the texturing of cement roads.  With milling width at 1,000mm, maximum milling depth at 300mm, front wheel steering mode, and lifting and  lowering mode of two rear pillars, its milling drum is mechanically driven (namely clutch + belt + reducer) and its  traveling system adopts fully-hydraulic four-wheel drive. The conveyance mode of one-stage belt rear discharge  is adopted. The right rear pillar can be rotated to the front of the milling drum to ease the welt operations. The  electric system adopts CAN bus network control technology, with fault diagnostic and alarm system. The standard  automatic leveling system is fitted for whole machine.  With the technologic orientation and configuration equivalent with German Wirtgen W100, this product is one  high-end model among the domestic like products.